dmesg - Intel Xeon E3-1200 v3
Linux version 4.10.13-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Thu Apr 27 12:15:09 CEST 2017
Command line: initrd=\initramfs-linux.img cryptdevice=/dev/lvm/lvroot:root root=/dev/mapper/root quiet rw
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000a2697fff] usable
BIOS-e820: [mem 0x00000000a2698000-0x00000000a269efff] ACPI NVS
BIOS-e820: [mem 0x00000000a269f000-0x00000000a34c4fff] usable
BIOS-e820: [mem 0x00000000a34c5000-0x00000000a3d33fff] reserved
BIOS-e820: [mem 0x00000000a3d34000-0x00000000c720ffff] usable
BIOS-e820: [mem 0x00000000c7210000-0x00000000c72a0fff] reserved
BIOS-e820: [mem 0x00000000c72a1000-0x00000000c72fcfff] usable
BIOS-e820: [mem 0x00000000c72fd000-0x00000000c7450fff] ACPI NVS
BIOS-e820: [mem 0x00000000c7451000-0x00000000cbffefff] reserved
BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0xa15cb018-0xa15eca57] usable ==> usable
e820: update [mem 0xa15ba018-0xa15ca057] usable ==> usable
e820: update [mem 0xa15aa018-0xa15b9857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000a15aa017] usable
reserve setup_data: [mem 0x00000000a15aa018-0x00000000a15b9857] usable
reserve setup_data: [mem 0x00000000a15b9858-0x00000000a15ba017] usable
reserve setup_data: [mem 0x00000000a15ba018-0x00000000a15ca057] usable
reserve setup_data: [mem 0x00000000a15ca058-0x00000000a15cb017] usable
reserve setup_data: [mem 0x00000000a15cb018-0x00000000a15eca57] usable
reserve setup_data: [mem 0x00000000a15eca58-0x00000000a2697fff] usable
reserve setup_data: [mem 0x00000000a2698000-0x00000000a269efff] ACPI NVS
reserve setup_data: [mem 0x00000000a269f000-0x00000000a34c4fff] usable
reserve setup_data: [mem 0x00000000a34c5000-0x00000000a3d33fff] reserved
reserve setup_data: [mem 0x00000000a3d34000-0x00000000c720ffff] usable
reserve setup_data: [mem 0x00000000c7210000-0x00000000c72a0fff] reserved
reserve setup_data: [mem 0x00000000c72a1000-0x00000000c72fcfff] usable
reserve setup_data: [mem 0x00000000c72fd000-0x00000000c7450fff] ACPI NVS
reserve setup_data: [mem 0x00000000c7451000-0x00000000cbffefff] reserved
reserve setup_data: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
reserve setup_data: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000042fdfffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI 2.0=0xc7416000 ACPI=0xc7416000 SMBIOS=0xf04c0 MPS=0xfd470
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z97X-SOC Force/Z97X-SOC Force, BIOS F5 05/07/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 0420000000 mask 7FF0000000 write-back
3 base 00E0000000 mask 7FE0000000 uncachable
4 base 00D0000000 mask 7FF0000000 uncachable
5 base 00CE000000 mask 7FFE000000 uncachable
6 base 00CD000000 mask 7FFF000000 uncachable
7 base 042FE00000 mask 7FFFE00000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [ffff8800000fd7a0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01d5f000, 0x01d5ffff] PGTABLE
BRK [0x01d60000, 0x01d60fff] PGTABLE
BRK [0x01d61000, 0x01d61fff] PGTABLE
BRK [0x01d62000, 0x01d62fff] PGTABLE
BRK [0x01d63000, 0x01d63fff] PGTABLE
BRK [0x01d64000, 0x01d64fff] PGTABLE
RAMDISK: [mem 0x7f26c000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000C7416000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000C7416080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000C7426708 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000C74161A0 010566 (v02 ALASKA A M I 00000088 INTL 20120711)
ACPI: FACS 0x00000000C744F080 000040
ACPI: APIC 0x00000000C7426818 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000C74268B0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000C74268F8 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000C74274E8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000C7427A28 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 0x00000000C74285A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000C74285E0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000C7428618 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000C7428988 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: BGRT 0x00000000C742E4E8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x00000000C742E520 0000B8 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
NODE_DATA(0) allocated [mem 0x42fdf6000-0x42fdfafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042fdfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000a2697fff]
node 0: [mem 0x00000000a269f000-0x00000000a34c4fff]
node 0: [mem 0x00000000a3d34000-0x00000000c720ffff]
node 0: [mem 0x00000000c72a1000-0x00000000c72fcfff]
node 0: [mem 0x00000000cbfff000-0x00000000cbffffff]
node 0: [mem 0x0000000100000000-0x000000042fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042fdfffff]
On node 0 totalpages: 4155284
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12648 pages used for memmap
DMA32 zone: 809463 pages, LIFO batch:31
Normal zone: 52216 pages used for memmap
Normal zone: 3341824 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000cd200000-0x00000000cf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xa15aa000-0xa15aafff]
PM: Registered nosave memory: [mem 0xa15b9000-0xa15b9fff]
PM: Registered nosave memory: [mem 0xa15ba000-0xa15bafff]
PM: Registered nosave memory: [mem 0xa15ca000-0xa15cafff]
PM: Registered nosave memory: [mem 0xa15cb000-0xa15cbfff]
PM: Registered nosave memory: [mem 0xa15ec000-0xa15ecfff]
PM: Registered nosave memory: [mem 0xa2698000-0xa269efff]
PM: Registered nosave memory: [mem 0xa34c5000-0xa3d33fff]
PM: Registered nosave memory: [mem 0xc7210000-0xc72a0fff]
PM: Registered nosave memory: [mem 0xc72fd000-0xc7450fff]
PM: Registered nosave memory: [mem 0xc7451000-0xcbffefff]
PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88042fa00000 s103768 r8192 d31400 u262144
pcpu-alloc: s103768 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4090332
Policy zone: Normal
Kernel command line: initrd=\initramfs-linux.img cryptdevice=/dev/lvm/lvroot:root root=/dev/mapper/root quiet rw
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16032664K/16621136K available (6363K kernel code, 1090K rwdata, 1984K rodata, 1292K init, 1032K bss, 588472K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
spurious 8259A interrupt: IRQ7.
tsc: Detected 4000.317 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8003.99 BogoMIPS (lpj=13334390)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K
ftrace: allocating 25119 entries in 99 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000cbe7d000 end: 0x000000cbe8bfff
DMAR: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64039.83 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xa2698000-0xa269efff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xc72fd000-0xc7450fff] (1392640 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 3:02:47, date: 05/23/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041CFE6000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041CD05800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041C80E200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8c9e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1a000-0xf7c1a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7c19000-0xf7c197ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c18000-0xf7c180ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:02:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:244e] type 01 class 0x060401
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:06:00.0: [1969:e091] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xf7b00000-0xf7b3ffff 64bit]
pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:07:00.0: [14e4:43a0] type 00 class 0x028000
pci 0000:07:00.0: reg 0x10: [mem 0xf7a00000-0xf7a07fff 64bit]
pci 0000:07:00.0: reg 0x18: [mem 0xf7800000-0xf79fffff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf7afffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
pci 0000:02:00.0: vgaarb: setting as boot VGA device
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:02:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xa15aa018-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa15ba018-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa15cb018-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa2698000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xa34c5000-0xa3ffffff]
e820: reserve RAM buffer [mem 0xc7210000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc72fd000-0xc7ffffff]
e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.1: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.2: PCI bridge to [bus 04-05]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf7afffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xcf200000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf7afffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:06:00.0: set MSI_INTX_DISABLE_BUG flag
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 13900K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb4ce8000-0xb8ce8000] (64MB) mapped at [ffff8800b4ce8000-ffff8800b8ce7fff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME with IRQ 26
pcieport 0000:00:01.1: Signaling PME with IRQ 27
pcieport 0000:00:1c.0: Signaling PME with IRQ 28
pcieport 0000:00:1c.2: Signaling PME with IRQ 29
pcieport 0000:00:1c.3: Signaling PME with IRQ 30
pcieport 0000:00:1c.7: Signaling PME with IRQ 31
efifb: probing for efifb
efifb: framebuffer at 0xf1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
microcode: sig=0x306c3, pf=0x2, revision=0x17
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 1:0:8
memory memory52: hash matches
rtc_cmos 00:02: setting system clock to 2017-05-23 03:02:47 UTC (1495508567)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1292K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1812K
Freeing unused kernel memory: 64K
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
i8042: PNP: No PS/2 controller found.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
SCSI subsystem initialized
libata version 3.00 loaded.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7c19000 port 0xf7c19100 irq 33
ata2: SATA max UDMA/133 abar m2048@0xf7c19000 port 0xf7c19180 irq 33
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-3: new high-speed USB device number 2 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
ata1.00: supports DRM functions and may not be fully accessible
ata2.00: disabling queued TRIM support
ata2.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0BB6Q, max UDMA/133
ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
ata2.00: supports DRM functions and may not be fully accessible
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5
ata2.00: disabling queued TRIM support
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
random: fast init done
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 3-14: new full-speed USB device number 3 using xhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hid-generic 0003:1B1C:0C04.0001: hiddev0,hidraw0: USB HID v1.11 Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:00:14.0-14/input0
tsc: Refined TSC clocksource calibration: 3999.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7350b459580, max_idle_ns: 881591204237 ns
usb 4-3: new SuperSpeed USB device number 3 using xhci_hcd
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
usb 3-3.2: new full-speed USB device number 4 using xhci_hcd
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:045E:07A5.0002/input/input0
hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-3.2/input0
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.1/0003:045E:07A5.0003/input/input1
hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-3.2/input1
input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.2/0003:045E:07A5.0004/input/input2
hid-generic 0003:045E:07A5.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-3.2/input2
usb 3-3.3: new full-speed USB device number 5 using xhci_hcd
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/0003:046D:C52F.0005/input/input3
hid-generic 0003:046D:C52F.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.1/0003:046D:C52F.0006/input/input4
hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3.3/input1
usb 3-3.4: new full-speed USB device number 6 using xhci_hcd
scsi 6:0:0:0: Direct-Access SanDisk Ultra 1.00 PQ: 0 ANSI: 6
sd 6:0:0:0: [sdc] 30464000 512-byte logical blocks: (15.6 GB/14.5 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 6:0:0:0: [sdc] Attached SCSI removable disk
input: Laview Technology Mionix Naos 7000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.0/0003:22D4:130C.0007/input/input5
hid-generic 0003:22D4:130C.0007: input,hidraw6: USB HID v1.00 Mouse [Laview Technology Mionix Naos 7000] on usb-0000:00:14.0-3.4/input0
input: Laview Technology Mionix Naos 7000 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4:1.1/0003:22D4:130C.0008/input/input6
hid-generic 0003:22D4:130C.0008: input,hiddev0,hidraw7: USB HID v1.00 Keyboard [Laview Technology Mionix Naos 7000] on usb-0000:00:14.0-3.4/input1
clocksource: Switched to clocksource tsc
NET: Registered protocol family 38
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-fstab-generator[328]: Mount point vfat is not a valid path, ignoring.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting POSIX Message Queue File System...
EXT4-fs (dm-3): re-mounted. Opts: (null)
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3999989171 Hz
vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
[338]: VMCI: shared components initialized.
[338]: VMCI: host components initialized.
[338]: VMCI: Module registered (name=vmci, major=10, minor=55).
[338]: VMCI: Using host personality
[338]: VMCI: Module (name=vmci) is initialized
/dev/vmmon[338]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[338]: Using tsc_khz as TSC frequency: 3999997
/dev/vmmon[338]: Module vmmon: initialized
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input8
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
ACPI: Power Button [PWRF]
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
wmi: Mapper loaded
i8042: PNP: No PS/2 controller found.
random: crng init done
systemd-journald[341]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20160930/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
[drm] Initialized
bcma-pci-bridge 0000:07:00.0: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
bcma: bus0: Found chip with id 0x4360, rev 0x03 and package 0x01
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0)
bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0)
bcma: bus0: Core 2 found: ARM CR4 (manuf 0x4BF, id 0x83E, rev 0x02, class 0x0)
bcma: bus0: Core 3 found: PCIe Gen2 (manuf 0x4BF, id 0x83C, rev 0x01, class 0x0)
bcma: bus0: Core 4 found: USB 2.0 Device (manuf 0x4BF, id 0x81A, rev 0x11, class 0x0)
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input10
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
bcma: Unsupported SPROM revision: 11
bcma: bus0: Invalid SPROM read from the PCIe card, trying to use fallback SPROM
bcma: bus0: Using fallback SPROM failed (err -2)
bcma: bus0: No SPROM available
bcma: bus0: Bus registered
alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [74:d4:35:ee:6a:bd]
snd_hda_codec_realtek hdaudioC1D2: ALC1150: SKU not ready 0x00000000
fuse init (API version 7.26)
snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC1D2: inputs:
snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
i915 0000:00:02.0: enabling device (0006 -> 0007)
[drm] Memory usable by graphics device = 2048M
checking generic (f1000000 300000) vs hw (d0000000 10000000)
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
iTCO_vendor_support: vendor-support=0
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=mem
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:16: registered as cooling_device14
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
alx 0000:06:00.0 enp6s0: renamed from eth0
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[drm] Cannot find any crtc or sizes - going 1024x768
checking generic (f1000000 300000) vs hw (d0000000 10000000)
i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
b43-phy0: Broadcom 4360 WLAN found (core revision 42)
b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 12, Type 11 (AC), Revision 1)
b43: probe of bcma0:1 failed with error -95
Broadcom 43xx driver loaded [ Features: PNLS ]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 381.22 Thu May 4 00:55:03 PDT 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 381.22 Thu May 4 00:21:48 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
Adding 33554428k swap on /dev/mapper/swap. Priority:-1 extents:1 across:33554428k SSFS
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input24
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input25
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input26
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card2/input27
/dev/vmnet: open called by PID 737 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 740 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 751 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 752 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 756 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-9582c97f-f20a-3c19-ce55-3ac7bbfcdc12) @ PCI:0000:02:00.0
alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
/dev/vmnet: open called by PID 709 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-enp6s0: up
bridge-enp6s0: attached
userif-2: sent link down event.
userif-2: sent link up event.
userif-2: sent link down event.
userif-2: sent link up event.
userif-2: sent link down event.
userif-2: sent link up event.
ISO 9660 Extensions: RRIP_1991A
userif-2: sent link down event.
userif-2: sent link up event.
/dev/vmmon[1627]: PTSC: initialized at 3999997000 Hz using TSC, TSCs are synchronized.
/dev/vmmon[1627]: Monitor IPI vector: ff
/dev/vmmon[1627]: HV IPI vector: f2
/dev/vmnet: open called by PID 1653 (vmx-vcpu-0)
device enp6s0 entered promiscuous mode
bridge-enp6s0: enabled promiscuous mode
/dev/vmnet: port on hub 0 successfully opened
/dev/vmnet: open called by PID 1653 (vmx-vcpu-0)
/dev/vmnet: port on hub 0 successfully opened
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_datagram_create_handle_priv
vmw_vsock_vmci_transport: Unknown symbol vmci_datagram_create_handle_priv (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_context_get_priv_flags
vmw_vsock_vmci_transport: Unknown symbol vmci_context_get_priv_flags (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_get_produce_indexes
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_get_produce_indexes (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_consume_buf_ready
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_consume_buf_ready (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_datagram_destroy_handle
vmw_vsock_vmci_transport: Unknown symbol vmci_datagram_destroy_handle (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_produce_buf_ready
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_produce_buf_ready (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_event_subscribe
vmw_vsock_vmci_transport: Unknown symbol vmci_event_subscribe (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_datagram_send
vmw_vsock_vmci_transport: Unknown symbol vmci_datagram_send (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_produce_free_space
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_produce_free_space (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_get_consume_indexes
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_get_consume_indexes (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_consume_free_space
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_consume_free_space (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_peekv
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_peekv (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_is_context_owner
vmw_vsock_vmci_transport: Unknown symbol vmci_is_context_owner (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_datagram_create_handle
vmw_vsock_vmci_transport: Unknown symbol vmci_datagram_create_handle (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_alloc
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_alloc (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_detach
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_detach (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_dequev
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_dequev (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_qpair_enquev
vmw_vsock_vmci_transport: Unknown symbol vmci_qpair_enquev (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_event_unsubscribe
vmw_vsock_vmci_transport: Unknown symbol vmci_event_unsubscribe (err -22)
vmw_vsock_vmci_transport: disagrees about version of symbol vmci_get_context_id
vmw_vsock_vmci_transport: Unknown symbol vmci_get_context_id (err -22)